The owner of this house in Wandsworth had imported these hard magnesium Limestone tiles direct from Italy and fitted them into a conservatory three years prior; over they years however they had lost their shine and started to go dull and look uninviting. This is fairly normal for polished stone which does need to be re-polished for it to keep its appearance however the owner was unhappy with the finish and wanted it re-polished. There were also a number of naturally formed holes in the Limestone floor and these needed filling to give a completely even appearance.
Stripping and Polishing the Limestone Tiled Floor
To resolve we filled the holes using grout coloured to match the Limestone surface and then proceeded to strip back the tile surface using a set of burnishing pads. These diamond encrusted pads come in a number of different colours each one does a different job from scrubbing to polishing. I started with the red pad together with water and then carried on with the white, then yellow pads using water. Finally when I had dried the floor I used a green pad to buff the floor up. This activity took most of the day so left the floor to dry overnight.
Sealing Magnesium Limestone Tile
The next morning I arrived to find the floor had dried out and so began to seal it which was done using a couple of coats of Tile Doctor Colour Grow which does what it says on the bottle and as well as provided stain protection lifted the natural gold colour in the Limestone floor. Once the sealer had dried I then finished it all off with a quick buff using a white buffing pad.